Tools Required:
18mm socket
21mm socket
Floor jack
2 jack stands
Torque wrench

Step 1. Jack the car up, place on jack stands, and remove the wheels and tires.

Step 2. Place jack underneath the differential, and jack the differential up just enough to take the tension off of the bolts on the panhard rod.
Step 3. Take the 18mm and 21mm socket wrenches and remove the two bolts holding the panhard rod in place.
Step 4. Remove the panhard rod from it's place.
Step 5. Test fit the new panhard rod to insure that the holes line up.

Step 6. Place the new panhard rod in place, and thread the bolts back in.
Step 7. Torque the bolts to 50 lb-ft.
Step 8. Lower the jack holding the differential up, replace the wheels and tires.

Origionally Posted on Z28.com by Matt (1LE Hawk)

Click Here for the Origional Source